Vehicle Tracker – GNX-MI

With The Help Of RFID Card Get Students & Employees Trip Reports

Vehicle Tracker – GNX-MI
  • Vehicle tracking device using GPS and GPRS.
  • Quad band GPRS Modem.
  • GPS with In-built Patch Antenna.
  • USB, CAN, 1-Wire, RS-232, Analog Inputs, Digital Inputs and Digital Outputs.
  • 3 Axis Accelerometer .

MCU

 

USB

 

GNSS

 

Capacity

1100mAH @ 3.7V

Core

ARM Cortex-M4

Type

Device, USB 2.0

GPS+GLONASS

GPS- 1575.42MHz,

Protection Circuit

Yes. Internal to Battery Pack.

Memory

256KB Flash, 60KB RAM

Connector

Micro USB AB

 

GLONASS - 1601.71 MHZ.

Battery temperature

Yes.

 

 

 

 

Output format

NMEA 0183

monitoring using NTC

 

Memory for Offline Logs

 

RS-232

 

No. of Channels

33 Tracking, 99 Acquisition

 

 

Type

Data Flash

Baudrate

2400 to 115200 Configurable

Sensitivity

Acquisition -148dBm

Electrical

 

Size

2Mbyte / 15000 Logs

Hardware Handshake

No

 

Tracking -165dBm

Input Voltage

7.2 to 40 VDC.

 

 

 

 

Antenna

Internal (External optional)

Power Consumption

3 Watts Maximum

RFID Reader (MIFARE + NFC)

 

CAN

 

 

 

Protections

Reverse Battery

Supported Standards

ISO-14443-A (ID only)

Speed

250 / 500 Kbps

Inputs / Outputs

 

 

Transient Protection

 

Other protocols under

Protocol Support

ISO 15765-4

Digital Inputs

3 Nos.

 

Under voltage lockout

Measurement Range

45mm

 

J1939

Voltage levels

0 to 7.2V Logic Low / OFF

 

EMI/EMC Filter

 

 

 

OpenCAN

 

7.2 to 37V Logic High / ON

 

 

Cellular

 

 

 

Alternate Functions of Digital Inputs

 

Certifications

 

Communication

2G, GPRS

Voice / Audio

 

Digital Input 1

Odometer Pulse

In Process...

 

Frequency

Quadband

Connector

4 Pin Relimate

Digital Input 2

Ignition Input

 

 

 

850/900/1800/1900 MHZ

Speaker

1W, 4Ohm

Digital Input 3

Panic

Environmental

 

GPRS Class

Class 12

Mic

1.5V working Voltage

 

 

Operating Temperature

-40 to 85 Deg C

Antenna

Internal (External optional)

 

Load Resistance 2.2KOhm

Digital Outputs

2 Nos.

 

Charging of Battery shall be

SIM card

1.8/3.3V, Micro SIM

 

 

Current

Open Drain, 500mA max.

 

 

Data Support

TCP, HTTP, MQTT, SMS

Internal Battery

 

 

 

Mechanical

 

 

 

Type

Li-ion Rechargeable

Analog Inputs

1 Nos.

Dimensions

120 X 88 X 45 mm.

 

 

 

 

Range

0-10V (0-30V optional)

Material

ABS (UV stabilised + HR)

Status LEDs

Power, Cellular, GPS

 

 

 

 

Ingress Protection

IP65

 

 

 

 

+5V Output

300mA Fused,

Weight

TBD

Slide Switch

For Reset, Firmware update

 

 

 

With MOSFET based ON/OFF

 

 

 

using USB