Vehicle Tracker – GNX-2I

Vehicle Tracker – GNX-2I

Vehicle Tracker – GNX-2I

  • Vehicle tracking device using GPS and GPRS.

  • Quad band GPRS Modem.

  • GPS with In-built Patch Antenna.

  • USB, 1-Wire, RS-232, Analog Inputs, Digital Inputs and Digital Outputs.

  • 3 Axis Accelerometer.


MCU
 
USB
 
Core
ARM Cortex-M4
Type
Device, USB 2.0
Memory
256KB Flash, 60KB RAM
Connector
Micro USB AB
 
 
 
 
Memory for Offline Logs
 
RS-232
 
Type
Data Flash
Baudrate
2400 to 115200 Configurable
Size
2Mbyte / 15000 Logs
Hardware Handshake
No
 
 
 
 
Accelerometer
 
1-Wire
 
Measurement Range
+/- 16g
Supported Devices
 i-button for Driver Identification
Resolution
12Bit
 
RHT03 for Temperature and
 
 
 
 
Cellular
 
Voice / Audio
 
Communication
2G, GPRS
Connector
RJ-11 4 Pin.
Frequency
Quadband
Speaker
1W, 4Ohm
 
850/900/1800/1900 MHZ
Mic
1.5V working Voltage
GPRS Class
Class 12
 
Load Resistance 2.2KOhm
Antenna
Internal (External optional)
 
 
SIM card
1.8/3.3V, Micro SIM
Internal Battery
 
Data Support
TCP, HTTP, MQTT, SMS
Type
Li-ion Rechargeable
 
 
Capacity
1100mAH @ 3.7V
GNSS
 
Protection Circuit
Yes. Internal to Battery Pack.
GPS+GLONASS
GPS- 1575.42MHz,
Battery temperature
Yes.
 
GLONASS - 1601.71 MHZ.
monitoring using NTC
 
Output format
NMEA 0183
 
 
No. of Channels
33 Tracking, 99 Acquisition
Electrical
 
Sensitivity
Acquisition -148dBm
Input Voltage
7.2 to 40 VDC.
 
Tracking -165dBm
Power Consumption
3 Watts Maximum
Antenna
Internal (External optional)
Protections
Reverse Battery
 
 
 
Transient Protection
Inputs / Outputs
 
 
Under voltage lockout
Digital Inputs
3 Nos.
 
EMI/EMC Filter
Voltage levels
0 to 7.2V Logic Low / OFF
 
 
 
7.2 to 37V Logic High / ON
Certifications
 
Alternate Functions of Digital Inputs
 
In Process...
 
Digital Input 1
Odometer Pulse
 
 
Digital Input 2
Ignition Input
Environmental
 
Digital Input 3
Panic
Operating Temperature
-40 to 85 Deg C
 
 
 
Charging of Battery shall be
Digital Outputs
2 Nos.
 
 
Current
Open Drain, 500mA max.
Mechanical
 
 
 
Dimensions
120 X 88 X 45 mm.
Analog Inputs
1 Nos.
Material
ABS (UV stabilised + HR)
Range
0-10V (0-30V optional)
Ingress Protection
IP65
 
 
Weight
TBD
+5V Output
300mA Fused,
 
 
 
With MOSFET based ON/OFF
Slide Switch
For Reset, Firmware update
Status LEDs
Power, Cellular, GPS
 
using USB